Name: |
||
Tin dioxide electrodes |
||
Trade name: |
||
Tin dioxide electrodes |
||
Suppliers: |
||
|
||
Chemical composition/starting materials: |
||
Tin oxide, antimony oxide, cupric oxide, zinc oxide |
||
Properties: |
||
Mechanical |
||
|
Unit: |
Value: |
Ultimate tensile strength |
[MPa] |
|
Compression strength |
[MPa] |
|
Bending strength |
[MPa] |
|
Yield stress |
[MPa] |
|
Young's Modulus |
[GPa] |
|
Kirchhoff's Modulus |
[GPa] |
|
Helmholtz's Modulus |
[GPa] |
|
Elongation at break |
[%] |
|
Poisson's Ratio |
[1] |
|
Hardness |
[depending on method] |
|
Impact toughness |
[J/cm2] |
|
Fracture toughness |
[MPa·m1/2] |
|
Thermal & Physical |
||
|
Unit: |
Value: |
Density |
[g/cm3] |
6.0 – 6.7 |
Thermal conductivity |
[W/m∙K] |
|
Thermal expansion |
[μm/m∙K] |
|
Specific heat |
[J/kg∙K] |
|
Resistivity |
[Ω] |
0.5 - 500 |
Melting point |
[K] |
|
In-service |
||
|
Unit: |
Value: |
Maximum service temperature |
[K] |
|
Minimum service temperature |
[K] |
|
Wear resistance |
[depending on method] |
|
Corrosion resistance |
[depending on method] |
|
Oxidation resistance |
[depending on method] |
|
Other properties |
||
Any other properties of the material. |
||
Microstructure: |
||
SnO2 solid solution with Zn, Sb and Cu traces ; sintered microstructure with low porosity |
||
Manufacturing techniques, treatments: |
||
Mixing + Extrusion + Drying + Firing. Optional: mechanization and annealing |
||
Examples of application: |
||
Ceramic electrodes for different uses: swimming pool electrochorinators, cathodic protection, electro osmotic damp proofing, etc. |
||
Modeling and simulations: |
||
|
||
Bibliography: |
||
|
||
Supplier/information: |
||
Copyright 2008-2016 KMM-VIN AISBL | KMM-VIN AISBL website Terms&Conditions